How to release the handle lock and how to use it correctly?If the lock cannot be released, it may be another trouble

Handle locks are standard adopted anti -theft devices

The handle lock is a anti -theft device.It is also called a steering rock, and is always used in the current car so that cars are not easily stolen.

Not only the device itself, but also the state of locking the handle.If the handle is locked, the handle cannot be turned unless it is released.

In addition to the handle lock device that is standard on the car, the handle lock product that is literally locked on the handle is sold.The retrofit handle lock is explained in another article.

If you are locking, you will not be able to roll the car straight.Therefore, vehicle theft can be prevented due to a kendo.

In addition, you cannot start the engine when the handle lock is applied.

If there is no handle lock, even if you cannot open the door, you can steal if you float the rear wheels.Also, if you open the key, enter the car, and remove the side brake, it is possible for people to push and roll.

However, even in such situations, you cannot roll the tires with handle locking.Of course, you can't even ken and you won't be able to run on your own.

Handle lock mechanism

There is a dent in a part of the steering shaft called a steering shaft.The handle lock mechanism is to lock the handle by hooking the protrusion into the dent.

The old handle lock was a mechanism to store protrusions by inserting the key mechanically.However, after the spread of push starters, protrusions have been stored by electric.

In the case of an electric type, the sensor of the ignition switch is detected and the motor of the steering rock is rotated to release the handle lock.

Both functions are the same, only the difference between electric or mechanical.

However, in the case of an electric type, if the motor of the steering lock breaks down, it may develop into a problem that the handle lock cannot be released.But you don't have to worry too much because this is a rare trouble.

Handle locking method and usage

After turning off the engine, turn the handle to the right or left to lock it.However, after the handle lock is unlocked, it may be difficult to lock.

In that case, please open the door of the driver's seat once.Opening the door is almost always locked.

How to unlock the handle lockと正しい使い方は?ロックが解除できない場合は別のトラブルかも

If this is not locked, check the shift position.In the case of an AT car, be careful as the handle lock will not be applied unless you put it in "P".

If you lock the handle, the engine will not start.Because it is a anti -theft device, the release of the handle lock is allowed to start the engine.Therefore, in the case of a key insertion type car, the key will not turn unless the handle lock is released.

The same is true for the push start type, and no matter how much the engine start button is pressed, the engine will not start if the handle lock is applied.At that time, there is a display such as "Please release the handle lock" in the meter, and the engine cannot be started.

In this way, both insertion type and push type cannot start the engine unless the handle lock is released.

How to unlock the handle lock

The handle lock can be released by shaking the handle a little while turning the ignition key.

If you can't unlock it, cut it out in the direction of turning the handle.Depending on the condition of the protrusion, the projection may not be stored by just shaking a little.

In that case, you can smoothly unlock the handle by performing the above method and creating a gap between the protrusion and the dent.By devising the method without trying to release it by force, it can be released with a small force.

The keyless entry smart key and how to unlock the Hunlock are not much different from the analog keys.Just press the engine start button while moving the handle to the left and right, so it can be easier than how to release the analog key.

If the handle lock is not released, the indicator of the engine start button flashes, so use it as a guide.

How to release the handle lock does not differ depending on the manufacturer.With the above method, you can basically unlock any handle lock.

If the handle lock does not come off, I would like you to try the above method, but if it does not come off, the steering lock unit may be broken.

The steering unit is the part name of the handle lock.This device contains protrusions for locking the handle.

As I have said many times, don't worry because it's not a part that rarely breaks.However, some manufacturers have a recall and service campaign.

Some models of Suzuki, Nissan, and Mitsubishi have announced a handle lock service campaign.The target models are as follows.

メーカー対象車種メーカーサイトURL
スズキワゴンR/アルトラパン/パレット/アルトスズキリコール情報
日産ルークス/モコ日産リコール情報
三菱デリカD2三菱リコール情報

If the handle lock is suddenly unlocked and the engine does not start, it may be the target of the service campaign.Don't try to repair it yourself, be sure to check with the dealer.

Frequent troubles of handle locks

If the handle lock check lamp lights up, the handle lock may be broken.The type of check lamp of the handle lock varies depending on the model, and the shape cannot be conveyed in general.

Handle lock failures include symptoms such as unable to release the handle lock and the sound of locking is strange.In some cases, the check lamp lights up when it is not related to the handle lock.

In addition to the handle lock, it is possible that keyless is the cause, so it is important to understand the detailed state.

Although it is not a part that breaks down, a defect has been confirmed in a specific model.If the check lamp turns on while using a car or in parking, contact your favorite dealer, maintenance shop, JAF, etc.

If the handle lock is not released, you cannot start the engine.However, it is not always "the engine is not started = the handle is locked".

There are many possible causes, such as the battery rise, the keyless battery, and the shift is not included in "P".If the engine suddenly runs out, let's check the basic part without deciding on a handle lock.

The causes and solutions that can be considered when the engine is not started is explained in detail in a separate article.